ABOUT US
◆
RELATED INDUSTRIES
E Ink technology digital solutions are energy efficient, readable under sunlight, and cost effective.
Our zirconia beads can help produce organic pigments in e ink.
ELECTRICAL INK
With the development of nanometer and ultrafine powder technology and the continuous improvement of ink manufacturing technology, the continuous improvement of spraying device, digital Inkjet printing technology has been comprehensively and rapidly developed.
Ceramic Ink/ Inkjet Ink/ Digital Ink
As the cathode material of lithium-ion battery, it has the advantages of wide source of raw materials, long cycle life and environmental friendliness. Mass production of lithium iron phosphate cathode material requires zirconia beads with low wear rate. Using our low wear zirconia beads can greatly reduce the cost.
LiFePO4
Give us a call or drop by anytime, we endeavour to answer all enquiries within 24 hours on business days.We will be happy to answer your questions.
SANXIN NEW MATERIALS Co., Ltd. is a private high-tech enterprise integrating R&D and production. It focuses on the development, production and sales of high-tech fine chemical products. After years of technical accumulation, it has developed ceramic grinding media and ceramic parts, yttria stabilized zirconia bead, alumina and zirconia silicate beads, ceria stabilized zirconia beads are widely used in many fields. Our main technical and management personnel has been engaged in the research of zirconium dioxide ceramic grinding media for more than 30 years.
There are four main achievements for Sanxin New Materials:
①1984~1991, zirconium dioxide (yttrium oxide)-zirconium dioxide series nano powder wet preparation technology with controllable agglomeration state;
②1987~1991, the characteristics of friction system of Y-TZP ceramics;
③In 1994, zirconium dioxide (yttrium oxide) beads above Ф0.8mm diameter were prepared by rolling method, which was the first in China.
④From 2010 to 2015, the drop ball forming process was studied, the product is applied in ceramic ink grinding.
SANXIN® products are high-performance zirconia bead products manufactured using advanced technology. Manufactured from high-quality, high-performance materials, especially zirconium, this product is used in a wide variety of advanced applications such as grinding and dispersion, sensors and semiconductors.
WHAT WE OFFER
-
-
-
Best Price Of Zirconia Beads to manufacture Lithium ion Batteries Materials Nano Zirconium Grinding Balls Dry and Wet Grinding
Sanxin zirconia grinding beads (0.03mm/0.05mm/0.1mm/0.2mm) can be use to manufacture nanoparticle materials, the nanoparticles areproven solutions for:
Multilayer Ceramic Capacitors
Liquid Crystal Display (LCD)
Polish (CMP)
Photo Catalysts
Digital Printing Ink/Nano Colour Paste2023-02-16 -
Zirconia Microsphere Grinding Deads
SXYZV high quality microsphere grinding beads are produced from the consistent high quality yttria-stabilized zirconia powder through the latest hydrolysis process. It have super grinding efficiency because of highest crushing strength, lowest wear loss. The qualities and properties reach the international advanced level. It is suitable for grinding material down to Nano size such as electronic ceramics;ceramic ink;MLCC;CMP and Photo Catalysts etc.2022-05-19 -
95% Y-TZP Yttria Stablized Zirconia Beads
High strength, hardness and wear resistance, non-toxic, suitable for high shear sand mill, special for nano grinding.2022-02-16 -
Zirconium Silicate Grinding bead
Zirconium Silicate Composite Grinding Media (SXZS/SXMX Series) Applications: SXZS/SXMX grinding media are produced from high purity and ultra-fine zircon powder. They have homogenous microstructure and no hollow. SXZS/SXMX exhibit high strength and excellent cost effective performance compared against fused zirconium silicate bead and others. The qualities and properties reach the international advanced level. They are specifically suitable for ultrafine grinding metal and no-metal ore such...2022-01-11
-
-
-
B4C Grinding bead
Boron carbide ball Performance units, Composition B4C Density,g/cm3, 2.50-2.65 Modulus of elasticity,Gpa 510 KNOOP hardness 3300 Flexural strength,Mpa 400-650 Compressive strength,Mpa 4100 Fracture toughness,Mpa m1/2 4.5-7.0 Thermal expansion coefficient.1/0k 4.5*106 Thermal conductivity/m 0k 29 Maximum use temperature in air,℃ 15002022-01-12 -
SiC Silicon Carbide Grinding Beads
Silicon carbide grinding ceramics ball with normal pressure sintering of silicon carbide (SSiC) by fine silicon carbide powder sintering additives, sintering in 2000-2200 degrees of inert atmosphere, silicon carbide ceramics with high performance, good thermal shock and thermal conductivity and high wear resistance, is to make chemical pump seal ring, shaft sleeve, high temperature nozzle, wear-re2022-01-11
-
-
-
-
Alumina ceramic ring
Long service life, high processing accuracy, strict quality testing, reliable quality, used in precision mechanical parts such as aviation, chemical, petroleum, automotive military, photovoltaic energy and other fields2022-02-25 -
Ceramic crucible (Alumina)
2022-02-25 -
Alumina Bullet-Proof Ceramic
2022-02-18 -
Customized Zirconia Ceramic Part
We can produce the other Zirconia Ceramic Part according to the customer’s demand.2022-02-18 -
Zirconia Ball Valve (ZBV)
2022-02-18 -
Zirconia Part in high speed Paper-Making machine (ZPP)
There are some zircoina part in high speed paper-making machine like wiper, dewatering board, slitter and so on. It behave smooth and wear-resistance performance which it can save more cost.2022-02-18
-
BLOGS
-
The future of yttrium stabilized zirconium grinding beads
The future of yttrium stabilized zirconium grinding beads is likely to be influenced by advances in material science and manufacturing technology, as well as changes in the market demand for high-performance grinding media.
넶0 2023-02-16 -
Ceramic grinding balls in grinding GCC, achieve fine particle size(8-25μ in Wolkem)
SANXIN New Material provides zirconia compound ZTA balls and alumina balls for GCC grinding.
넶24 2022-10-25 -
Ceramic Silicon Nitride(Si3N4)
SANXIN ceramic silicon nitride balls are widely used, It has stable performance, good consistency, the size 0.4mm to 100mm, from grade G5-G100.
Most are black silicon nitride balls, if necessary, we can also provide gray ones.
We have mass stock, can deliver anytime you want.
Meet the requirements of various specifications and non-standard sizes.넶19 2022-08-30 -
How to choose the type of bead mills
As explained in the previous section, it is very important to choose proper bead size according to the purpose of processing. It is, therefore, important to select the best method of bead separation, which depends on the bead size.
Selection of the bead separation methods is, therefore, one of the most important factors for choosing the type...넶52 2022-04-22
Subscribe Us
Navigation
SANXIN NEW MATERIALS CO., LTD